ZX81 News

See all articles from Sinc-Link v3 n5
Author(s): Peter McMullin
Publication: Sinc-Link
Pub Details: Sinc-Link v3 n5 (Volume 3, Issue 5)
Date: September/October 1985
Pages: 4-5

#4 in a series

Welcome to another exciting roundup of resources for ZX81/TS1000 users! To reinforce my comments in the Aug. issue, I offer two unequivocal statements for the record:

1: Yes, ZX81 user support has moved “underground”.

2: NO, the ZX81 support market is NOT dead!

Because of fact#1 (despite fact#2 ? ), I am constantly encountering fellow computerists who simply don’t know where to turn for information about support for their computer. The state of the ZX81 market is such that user participation, communication, and mutual support are absolutely crucial. When Timex pulled the plug, so did many of the larger aftermarket support companies. What did that leave? The truly dedicated supporters and enthusiasts who saw the potential of the machine, rather than just the dollar signs in an “up” market.

Fact is, folks (newcomers and old hackers alike): the free rides are (long since) over. It’s up to US to support suppliers with our business if we expect them to continue. It’s up to US to communicate with each other- to share information and ideas. I speak from both sides of the fence here: Timex’s exit has rendered us equal, supplier and user alike, in mutual support requirements.

Many newcomers to ZX land have expressed concern that there isn’t much ZX81 support available these days. NOT SO! A lot of the extraneous garbage (which certainly padded out the appearance of the marketplace) has disappeared, but what’s left is the cream of the crop. Name virtually any conceivable software application, hardware upgrade, or communications support that was ever available during the “Timex peak”: all the best is still available, and will continue to be for a while. My list is still growing, not shrinking!

Now arise the questions:

-“How do I find out who this stuff is available from?”

-“Where and how can I learn more about my computer, and share what I’ve discovered with others?”

Fortunately, there are several answers. Participate in the activities of your local User Group. Get to know the skills & interests of other members- and make yours known, too. There’s ALWAYS someone who can benefit from knowledge you may take for granted. Similarly, those who don’t ask don’t get. DO NOT be embarrassed to ask questions of more experienced users. We all must start somewhere. I’ve never met an unfriendly ZX user!

There is no rule that says you can only belong to one User Group. Currently, in addition to at least 5 dedicated “real magazines”, there is a large (and growing) number of active User Groups across the continent, many of which publish excellent Newsletters. By subscribing to a few of these publications, you will find yourself overwhelmed at the resources available to you. Your interaction with support publications should NOT stop with your subscription check! The articles & letters you read were contributed by someone just like you. So if you have a program you’ve written, news you’d like to share, praise, or a gripe, then write about it and send it in! Most newsletters also offer free classified ads to subscribers as an additional benefit.

To help you make some rewarding contacts, a new section has been added to the ZX News column, called “RESOURCES”. In this and following instalments, along with the usual reviews, tips, & news, several reliable sources of ZX81 user support will be listed with brief descriptions. Now, on to the good stuff!

RESOURCES:

This month: 5 of the “most important” publications for the T/S enthusiast. (In no particular order)

TIME DESIGNS MAGAZINE
29722 HULT RD.,
COLTON, OREGON 97017

-6 issues/year for $15.00 U.S., to the U.S. or Canada. -About 34 pages/issue. Very nicely produced, with an excellent advertising section & very good editorial content. Started out a little “2068-heavy”, but 1000/ZX content is steadily increasing. Each successive issue looks more exciting (and they arrive consistently on time!). An excellent value. Back issues available.

T-S HORIZONS
2002 SUMMIT ST.,
PORTSMOUTH, OHIO 45662

-6 issues per year for $21.00 U.S. to Canada ($15.00 to the U.S.) -About 32 pages/issue. Very good production & advertising support. Has a good, consistent balance of 1000/2068 topics, with lots of software tutorial articles, and product reviews. Usually late, but always worth waiting for. Well worth the price. Back issues available.

SYNCWARE NEWS
c/o THOMAS B. WOODS
P.O. BOX 64,
JEFFERSON, NH 03583

-6 issues per year for $19.95 U.S. to Canada ($16.95 to the U.S.) -About 24 pages/issue. Very good production & advertising support. SWN is traditionally a ZX81/TS1000 mag. Although lots of 2068 articles are printed, the emphasis remains on the 1000. SWN’s forte is in hardware and advanced programming articles, although the beginner is certainly not ignored. Delivery is on schedule (well, almost), and back issues are available. In my opinion, this is THE most technically competent publication around. Highly recommended.

SUM MAGAZINE
3224 NW 30th AVENUE,
GAINESVILLE, FLORIDA 32605

-12 issues per year for $12.00 U.S. -About 32 pages/issue. -Real slick production, good advertising support. Very good all-round editorial content- a real potpourri of various subject areas catering to both the 1000 and 2068. For the price, it’s a steal. Although no increased rate for postage to Canada is mentioned, I’m sure an extra couple of bucks from some of us northern subscribers would not go unappreciated.

CTM
c/o CHET LAMBERT, W4WDR
1704 SAM DRIVE,
BIRMINGHAM, AL 35235

-4 issues per year for $25.00 U.S. to Canada ($15.00 to U.S.) -I’ve never actually read a copy of CTM, but include it here because I’ve received so many enthusiastic recommendations from reliable sources. CTM is NOT for T/S exclusively- you’ll find sections on Commodore, TI, Atari,etc. as well. The T/S coverage, however is reportedly comprehensive, timely, and well presented. More details when I get my hands on a copy.

*This is by no means a complete listing. RESOURCES continues next issue.

FOLLOWUPS:

–CALLISTO SOFTWARE, 924 2nd ST. EAST, SASKATOON, SASK. S7H 1R1 now have available the ZX software hi-res program as described last issue. The program is called GRAPHICA, and is provided with an impressive (and useful) 14-page manual, with clear explanations of all commands, and several sample listings to get you started. GRAPHICA gets my highest recommendation: it’s the BEST software-only hi-res package I’ve seen. GRAPHICA is underpriced at $15.00 CAN.

-CONTACT TREATMENTS: CRAMOLIN = MAGIC!

Cramolin is a hi-tech contact cleaner/preservative that all ZX81 owners should know about. (used by NASA, IBM, Armed Forces, etc., in case you want references!) There are two versions: Red, for cleaning dirty contacts, & Blue, for preserving new (clean) contacts. Cramolin was introduced to the public for the audiophile market (for treating Moving-Coil phono cartridge contacts, etc.- you can HEAR the improvement). Cramolin is available in Canada from AVALON AUDIO, 571 QUEEN ST. W., TORONTO, M5V 2B6, (416) 363-2026. The “Audio Kit” is the best approach- it includes a 2oz. bottle each of the Red and Blue concentrates for $35.00, plus shipping if applicable. That may sound like a lot of money, but that kit should literally last you a lifetime. THE LESS YOU USE, THE BETTER!

I make a preparation as follows: get 2 bottles of Freon TF (RADIO SHACK Professional Head Cleaner, cat. no. 44-1171). Put 2 or 3 drops (!) of Red in one bottle, Blue in the other. Now put your Cramolin Kit away- the solutions you just made will likely last over a year.

Every 2 months, clean all your edge connector contacts with the Red solution, followed by a light swab of the Blue, using Q-Tips. (More often if you’re constantly (un)plugging stuff.) You’ll be AMAZED at the oxides & related crap that comes off even a clean-looking connector. While you’re at it, treat the contacts & controls on your stereo, VCR, printer, etc.: Cramolin also makes history of “crackly” volume controls.

After a Cramolin treatment, I can pick up my computer and physically wiggle everything without causing a crash! Cramolin is also available in the U.S. from OLD COLONY SOUND LAB, P.O. BOX 243, PETERBOROUGH, NH 03458.

FROM ACROSS THE POND…

Thanks to colleague Larry Chavarie of Ottawa, (who subscribes to even more publications than I do), I will be listing a number of British concerns which continue to support the ZX81 aftermarket. MAPLIN ELECTRONIC SUPPLIES LTD., P.O. BOX 3, RAYLEIGH, ESSEX, ENGLAND SS6 8LR, tel. (0702) 554155, is the U.K. dealer for HEATHKIT, but that’s only part of the picture. Maplin offers no less than 9 hardware project kits for the ZX81, including a fullsize keyboard, I/O ports, motherboards, sound and speech generators, a TV sound/inverse video kit, modem interface, extendi-RAM, and a hi-res graphics module. Prices are very reasonable. Most of these are male-only cards which are also compatible with motherboards available in the U.S. from Jonn Oliger and Budget Robotics & Computing. Maplin also still offers over 15 books about the ZX81 (with something for everyone), and publish their own electronics project magazine. 12 issues are currently available, and almost every one has a ZX81 project! (How about a ZX81 navigation/autopilot system for your yacht?!)

Larry tells me Maplin gives prompt, reliable service. 450 page catalog is £1.35. If you wish to exercise the plastic, Maplin accepts Visa & Mastercard (called BarclayCard and Access in the U.K.). Check this company out!

EXTENDED BASIC:

Have you ever wished the ZX81 BASIC allowed multi-statement lines, or provided commands such as READ, DATA, RESTORE, IN, OUT, etc? Sure, lots of utilities have been around which provide these features, but most require RAND USR commands & POKEs which just aren’t “friendly” BASIC. Programming genius Frits Beniest, of Holland, has come to the rescue with a superb piece of software called EXTENDED BASIC.

EX.BAS. is an actual BASIC interpreter which lives in a 3.5K long 0>REM statement. Since the EX.BAS. statements are very compact, you can still write a large program in 16K. Use of EX.BAS. does not require any POKEs or RAND USR commands. EX.BAS. is activated by the statement GOSUB 0 in your program. The following line begins with REM, then the EXTENDED BASIC commands. After the REM, it’s almost like Microsoft BASIC. All the commands must be typed in (spelled out). You can include as many commands in a line as you want, separated by colons. A whole new world of BASIC programming opens up, since lots of Microsoft-type commands are included.

This makes it a snap to type in some neat BASIC listings published for the IBM, Apple, TRS80, 2068, etc. which use commands that were nonexistant in ZX BASIC.

EX.BASIC provides 22 new commands, extending Display, Data & String Handling, and Input/Output control.

*DISPLAY COMMANDS include: DRAW, UNDRAW, CIRCLE, UNCIRCLE, FILL, PAPER, UNPAPER, PRINT, PRINT AT, MOVE (a window scroll), SCROLL (by N lines), CLS (fast!), COPY, SCREEN$ (looks up character at specified screen coordinates, & returns it to a specified variable) *These 14 commands use all 24 lines. PRINT auto-scrolls at the bottom line: no more 5/ reports!

DATA & STRING HANDLING commands include DATA, READ, RESTORE (to specified DATA line), LEFT$, MID$, RIGHT$ (slice it!)

INPUT/OUTPUT CONTROL commands include KEY (like INKEY$, but faster, and can deal with multiple keys), IN (tests an input port and returns result to specified variable), OUT (sends contents of specified variable to indicated output port.) With these commands, you can program port-mapped control or measurement interfaces from BASIC.

EXTENDED BASIC seems to be virtually crash-proof, and has 12 meaningful new report codes to tell you when you messed up. Due to the ingenious nature of the interpreter, it’s incredibly fast- it can print up to 6,000 chars/sec. to the screen in SLOW mode! Due to the speed of the Display utilities, you can easily write animated games or graphics applications in EX.BAS. that rival the speed of Machine Code!

I simply cannot recommend this program highly enough. By the time you read this, it will be available from Thomas B. Woods (see p.4) Send an SASE to Tom for his new catalog- I don’t know his price but it should be in the $16.95 – $19.95 range. Fred Nachbaur has written a 20 page manual for EX.BAS., which is loaded with examples, tutorials on the use of the “new” commands, etc. E. Arthur Brown is also distributing EX.BAS., but with the (inferior) documentation provided by the author. Until E.A. Brown makes arrangements to supply the Nachbaur manual, I’d suggest you order EX.BAS. from Tom Woods.

5/5 – OUT OF ROOM!

NEXT ISSUE: More user info and less preaching about it. Detailed user reports on the AERCO ZX-Floppy Disc system, the Oliger/T.I. Video Upgrade (both arrived too late for a detailed write-up this time), Tips on Bus Loading problems (HINT: get a Z80B CPU), and mouthwatering reviews of some tantalizing new software. More RESOURCES. See ya.