TS1500 Is More Than Meets the Eye

Author(s): Fred Nachbaur, Greg Harder
Publication: SyncWare News
Pub Details: SyncWare News v3 n3 (Volume 3, Issue 3)
Date: Jan-Feb 1986
Pages: 23

We’ve all (well, almost all) used and loved the ZX81 and TS1000, and many of us have become enthralled with the TS2068. Yet there is another Timex/Sinclair, the TS1500, which somehow “fell through the cracks,” as it were, and is only occasionally even mentioned, even within these pages. If anything, the only thing we’ve heard were reports about bugs in the ROM, some rumours about “bank-switching ability,” and reports about SOME units not working with SOME software or add-ons.

The TS1500 is just a fancy ZX81, right? WRONG! Recent discoveries by Greg Harder (1st-prize winner of the TS1000 category in our screen contest) demonstrate that the 1500 is capable of FAR SUPERIOR “software-only hi-res” than ever was seen on a ZX81! All but the highest bit can be EXACTLY CONTROLLED! For low- to medium-density plots, the results are most impressive. Oddly enough, this only works if: 1) the 8-16K region is fully decoded, as with a Hunter board or 64K pack, OR 2) if the ROM is replaced with a TS1000 ROM. (?!) To see if it will work with your particular unit, enter Mr. Harder’s little “te[illegible]

   1 [illegible]
10 [illegible]
20 [illegible]
30 [illegible]
40 [illegible]
50 POKE L+3,71
60 POKE L+4,201
100 FOR N=0 TO 32
110 POKE L+1,N
120 RAND USR L
130 NEXT N
140 FOR N=0 TO 255
150 PRINT CHR$ N;
160 NEXT N
170 FOR N=0 TO 100
180 NEXT N
190 POKE L+1, 30
200 RAND USR L

“The machine-code in the REM line is:

LD A,nn
LD I,A
RET

“For values of I from 0 to 29 the screen fills with garbage as the computer reads the space character pattern at different ROM addresses [just as on the ZX81/TS1000]. For values 30 and 31 the normal pattern is addressed.

“However, if I is set to 32, then something strange happens, and the pattern printed to the screen consists of:

A) Chr. codes 0-63, a direct binary equivalent is printed.

B) Chr. codes 128-191, a complimented pattern is printed.

“This means that 128 binary patterns are directly available, from 0000 0000 through 0111 1111. Binary patterns with bit 7 set are not available, as the complimented form is automatically sent, and patterns with bit 6 set (64-127 and 192-255) are output as the “binary equivalent” of the token characters.” -G.C. Harder

Greg is presently working on a comprehensive hi-res package using this discovery, and yours truly is threatening a TRUE 64-column utility. If you try this with a TS1000, you’ll only get a black screen.

Internal circuitry is also far superior to the ZX81/TS1000, employing LS244 and LS245 bidirectional buffers instead of resistor strings. Could this be part of the “secret?” Tom Bent reports that the TS1500 SCLD has THREE UNUSED PINS (chip selects? bank switching?). Answers to these and other questions hinge on the following: is there a TS1500 tech manual? As far as we can gather, the answer is “NO.” Yet there is the occasional bit of corporate (Timex) technical memos which suggest that one was perhaps under construction. Are there any ex-Timex engineers out there reading this column? If so, let yourself be known! -fn

Note: Type-in program listings on this website use ZMAKEBAS notation for graphics characters.