Dear Readers,
The number of computer shops selling small micros is growing daily as is the number of different computers available. But one advantage none of them except the ZX computers seems to have is SYNTAX checking (that annoying routine that tells you that you have made a mistake and that the computer will not accept the line) on entry. Also most of them have made economies along the way, so that user-friendliness goes out the window, so I still think you have to go a long way to beat a Sinclair!
By the way, did you know that a computer magazine which does comparisons between various computers month by month for the business man compared the ZX81 with the brand new, very expensive IBM Personal computer and found that on some arithmetic examples the 1K machine was faster than the 16 bit 128K IBM machine! and on another 16 bit 128K RAM machine only 1.6K was left for the user to program with after the machine had taken up its demands on the RAM for running the computer. This is about the same as the TS1000!
Software Developments
Software Libraries
A lot of argument has developed recently in England about a new set of companies called software libraries. They lend you tapes (after you have paid a small membership fee) of your favorite software for a period of a week or two to see if you want to buy it. If you do, then you get a discount on the purchase price of the tape. If, however, you want to try another tape, then you pay a small fee, varying from £0.50 to £1.50 to exchange the tape.
Software companies are, of course, not in favor of this system as it stops direct sales of tapes to the user. This is because the libraries can use the same tape over and over again. The libraries say that they ban copying by any of their members. However, it is becoming so easy to copy ZX81 and Spectrum tapes that they cannot guarantee it.
Some software companies have refused to deal with these libraries and have even started court proceedings over the matter. They say the hiring of tapes is prohibited by the copyright law and that the libraries are breaking it by encouraging copying of their tapes by making it so cheap. Since the cost of a blank tape is only £0.50, copying a tape costing over £3.50 for a friend becomes tempting and profitable. The question of whether copyright applies to computer program tapes has never been settled in court.
This, of course, worries not only the ZX software producers but also companies like Commodore (Vic-20/64 and Pet) and Atari.
However, the buy ‘n’ try scheme reduced its buy back period to one month which suited the software companies and the case never went to court. It would have been nice to see a precedent set as regards software piracy and copying. Both sides would have something to go on. The Law has a very grey area here.
Compilers and Assemblers
Another new market is the increase in software utilities such as Basic compilers for the Spectrum. These allow you to convert a very SLOW Basic program into a super fast machine code version. However, they do suffer from two problems: 1) the compilers cannot handle strings and floating point numbers (only integers), and 2) the final code contains what is called “RUN TIME routines” without which the code will not work. These “Run Time Routines” are copyright, the compiler writers claim; and, since they must be included in every machine code written by a compiler, they claim you must ask their permission (and pay them a fee) before selling that program. This sounds a bit daft as the compilers themselves use Sinclair’s ROM routines (which are copyright), but they don’t pay Sinclair a penny!
Another useful utility is an assembler. This converts a machine code written in mnemonics (a bit like Basic) into the numbers the microprocessor will accept. It also allows you to use variables called LABELs which specify a routine or area of memory to be sorted out later.
A very good assembler for the Spectrum is called ZEUS from Crystal Computing and is written in line numbers, just like Basic. It also has a full screen editor which allows you to use the cursor keys to delete or add text in any part of the screen. The text (or source file as it is known) can be printed on to the Sinclair printer or SAVEd and LOADed separately from the assembler. The assembler also allows you to locate the code anywhere in memory or to assemble it for running somewhere else (in case the area you want is being used by the assembler). A monitor is also included which allows you to view and alter memory with the same full screen editing. It also includes a hex to decimal and decimal to hex calculator. It makes writing machine code as easy as Basic as it reports any errors found in assembly or elsewhere. A disassembler is also available from Crystal to complement the assembler.
Imagine Software
Imagine Software has surprised the news here by paying programmer £35,000 a year to write games for them. Imagine is a breakaway group from Bugbyte who decided to go independent and is now into a multi-million pound turnover business. Their fame is based on the fact that all of their games are new ideas, not rehashes of arcade games. Arcadia, Schzoids, and Wackey Waiters are some of the best selling machine code games around and must be the craziest! Wacky Waiters, for instance, requires you to deliver food to the guests in the diner, dodging the boss and drunks, and not spilling the drinks on the way. Imagine also promotes the designers of the games by naming them on the software packaging. And what is so special about their programmer? He has only just left school and at 16 cannot apply for a credit card or a bank account to put his money in! A wide variety of software is now appearing for the Spectrum from astrology to music composition. The music composition program, for instance, allows you to write the tune on the stave (music bars) which appears on the screen in note form using very good graphics. Tunes can be stored and played back either as BEEPs or using an external 8910 sound chip which gives three notes, envelope, and noise. This program should run quite effectively on the TS2000 as it should have one of these chips built in.
Weekly Computer Magazines
At least one of the weekly (yes, I do mean weekly!) hobby microcomputing magazines has taken a stand. They will not accept any advertising from software libraries that do not have an agreement with software houses whose tapes they are using.
The number of weekly magazines for hobby computing has recently increased to three with the advent of Home Computing Weekly (from the Publishers of Computing Today) and Personal Computer News (from the publishers of Personal Computing World). Popular Computing Weekly had been launched in April 1982 by Sunshine Publications. Micros and their products are now moving so fast that it only takes a week for the whole situation to change. These are not trade papers as they contain reader letters, programs, and advice, all for £0.35 a week!
Hardware Developments
Joysticks
The main features of the hardware side seem to be that joysticks must now be programmable or have a conversion tape available to fit them into the most popular games. Some of the major companies have even been persuaded to write into their games a piece of software to use joysticks made by Kempston Microelectronics. AGF is one of the companies whose joystick has now been made programmable It takes an ordinary Atari type joystick and converts it to operate the same as pressing any key, so there is no conversion required in software for any new game.
Printer Interfaces
Printer interfaces for the Spectrum have also been making their presence felt in large numbers to complement some of the commerial software available. TASWORD, a very fast 61 character per line, stores its text on tape (Sinclair’s microdrives still have not made an appearance). Originally it could print out only on the Sinclair printer, but Hilderbay and others have now produced an interface box with a centronics cable which will operate through TASWORD and its own driver software to print out on a full-sized printer. The graphics characters can be reprogrammed to give control characters such as underline, proportional text, enlarged and double height characters under user control. Also 132 or 80 characters per line make a great difference in formatting a page of text so that it looks a professional job.
Three Centronics printer interfaces have been produced for the Spectrum. Softest’s interface is designed to work with the four color Tandy (Radio Shack) Pen Printer which can draw diagrams under software control. The other two are designed to allow you to use any parallel printer to LPRINT, LLIST and COPY from inside a Basic program. Both use Sinclair’s own Basic commands to control the output to the printer, so no USR calls are required.
EuroElectronics interface box contains a ROM which changes LPRINT and LLIST commands to print on the centronics printer instead of the Sinclair’s. LLIST, however, lists until it overflows on the printer which gives sloppy listings unlike what appears on the TV screen. It also cannot handle graphics or special characters like the underline symbol. To COPY the screen means LOADing a tape which puts a machine code program above RAMTOP and a modification to the GP100 type printers to remove the automatic carriage return facility. If this is not done, you get a blank line between each character line. The interface costs £53.48 and is so simple to use that all the instructions are written on the bottom of the interface box.
The second interface, from Kempston Electronics, requires a machine code program of 650 bytes above RAMTOP. A Basic program modifies the machine code to suit your printer and your program. Once this is done, the Basic program can be dispensed with and only the machine code LOADed when required. The Basic program allows you to select what characters will be printed instead of graphics, what type of printer you have (different printers require different codes for double width etc.), and, best of all, printer line length. You can specify a 32 column line length so that it prints out the listing just like on the TV screen. The use of a Basic routine for COPY, however, is a bit disappointing as it is so slow. This is the most user-friendly interface I have found so far, cost £49.
Modems
One of the electronics component companies has introduced a modem and RS232 interface for the ZX81 (and soon the Spectrum) to work 300 baud over the telephone line. The restrictions on modems over here are rather stricter than in the USA and hence the delay. PRESTEL is still one of the promised facilities available when we get the right modem.
Tape Copiers
Tape copiers seem to abound, and it would seem there is no way that a program on tape cannot be copied. Most of them work on the fact that the Spectrum allows you to copy any part of the memory to tape. So, if you can write a program which will load any program as machine code and then SAVE it again as an area of machine code, you end up with an exact copy, whatever the software companies try to do.
The best copier I have seen is called ZAP 2.0 which is produced by Scimitar Software. Copying is, of course, illegal, but sometimes it is necessary to make a back-up copy of your software in case the tape recorder screws the tape up.
Sinclair Developments
The Spectrum was launched in Europe (very quietly) in April 1983 although some people had been arranging to get some directly imported through friends. Each country though wants programs and devices written in its own language and so the importers must do the conversion as most of the software houses do not change their software from country to country. As long as this keeps up, the European user will be short of both software and hardware that is not home produced.
RAM upgrades for the Spectrum have been dropping in price, some are now as low as £20 for the Model 2 machines. Sinclair has dropped the supply of RAM boards to Model 1 users due to the fact that he cannot compete with independent companies prices (the Model 1 needs a PCB instead of just the ICs as there are no sockets for RAM chips).
Sinclair has also dropped the microdrive for the moment, but has promised that the first 100,000 purchasers of the Spectrum will be given the first chance to buy them when they are available. He has also dropped the modem that was going to interface to the telephone line to pick up PRESTEL, a nation wide database run by Britain’s telephone company.
This has disappointed the producers of a special service called Micro-Net 800 who have had to look elsewhere for modems for the Sinclairs. Other machines can already be connected up via an RS232 interface using an acoustic modem and some specially written software. The idea of Micro-Net was to sell or give away software over the phone lines as well as providing an information service simular to the Source in the USA. The service would cost approximately £100. This included the price of the modem and software to run it over the membership period of a year. At least 100 free programs were to be made available for each type of microcomputer and at night access to the Micro-Net would only be the cost of a local phone call.
Sinclair has reduced prices over here to £39.95 for the ZX81 and £99.95/£129.95 for the 16K/48K models of the Spectrum.
The companies I have mentioned are all in England and are listed below.
Kempston Microelectronics Ltd., 180A Bedford Rd., Kempston, Bedford MK42 8BL. Tele: 0234 852997.
AGF Hardware, 26 Van Gough Place, Bognor Regis, W. Sussex PO22 9BY. Tele: 0243 823337.
TASWORD, TASMAN software, 17 Hartley Crescent, Leeds LS6 2LL.
Hilderbay Ltd., 8-10 Parkway, Regents Park, London NW1. Tele: 01 485 1059.
Scimitar Software, 3 Palace Gates Road, London N22 4BW. Tele: 01 889 1099
Crystal Computing, 2 Ashton Way, Sunderland SR3 3RX.
Home Computing Weekly, ASP, 145 Charring Cross Road, London WC2 EE. Tele: 01-437-1002/7
Personal Computer News, Evelyn House, 62 Oxford Street, London W1A 2HG. Tele: 01-439-4242
Popular Computing Weekly, Hobhouse Court, 19 Whitcombe Street, London WC2 7HF. Tele: 01-839-6835.
Softest, 10 Richmond Lane, Romsey, Hants.
EuroElectronics, 29 Clarence Square, Cheltenham, Gloucester. Tele: 0242-582009.
Imagine Software, Masons Buildings, Exchange Street East, Liverpool L2 3PN.