This circuit will simplify loading and saving programs by eliminating ground loop noise without the need to pull out the earphone plug during saving and the microphone plug during loading. A separate switch resets.
Build this circuit with jacks on the input (power and cassette) side and plugs on the computer side. Use a small DPDT switch for the cassette switch and a normally closed pushbutton switch on the “hot” (tip) side of the power supply circuit. Use a 12V pilot lamp (Radio Shack 272-332) and coaxial cables. Be careful to keep connections tip to tip and ring to ring; mistakes here can be serious.
To save a program, throw your switch so that MIC connects; to load, use the other position. Reset with the pushbutton.
