The Editor’s Forum

Author(s): Tim Woods
Pub Details: Time Designs Magazine v3 n4 (Volume 3, Issue 4)
Date: May/June 1987
Pages: 3

Thanks to Tim Stoddard, I had the chance to “play” with a ZX81 the past two months. But, this was no ordinary ZX. Tim generously loaned me his “souped-up” ZX81 to demo at the TS Computer Fest. This computer contained the internal 64k RAM modification that is described in his issue; plus attached to the rear buss, was his proto-type D.A.M. board (Data Acquisition Module). If you remember (see Jan/Feb ’87 and March/April ’87 issues of TDM) the board contains an analog-to digital converter, a digital-to-analog converter, and a real time clock. With the software that Tim had written, our demo could measure a room temperature reading from a small probe mounted at the top of the D.A.M. board, and display the reading on the screen. Also, a voltage in the range of 0 to 2.55 could be selected and typed in at the keyboard. The selected value would be printed on the screen and could be measured with a meter at two pins on the D.A.M. board. Not to mention that the real-time clock continuosly displayed the date and time. All of this operated at the same time on just one little ‘ol ZX81.

However, the most amazing thing was that Tim’s computer didn’t behave like the ZX81 I used to have. Let me explain. When Stephanie and I arrived at the Holiday Inn on Friday, the day before the show, we had a chance to set up early. I went ahead and put together the computer demo to make sure everything was going to work properly. Accidently, the ZX was left plugged-in overnite. The next morning (the day of the show) when I discovered it, the computer was just barely warm. It “fired up” up ok…no problems. During that day, the guests arrived and literally crammed into the exhibit room. With all of the computers and monitors (and warm bodies), the room temperature soared to 85°F (until some kind soul fixed the air conditioner). The ZX81 never once overheated or crashed it’s program during the entire Fest! Something could be said of Tim’s efficient internal 64k RAM design and the proper heat-sinking he used.

Along with the RAM upgrade article, we have news and photographs from the 1987 Midwest TS Computer Fest. Attending the Fest has made this issue come out a bit late. For this I apologize…but we should be back on track next issue. Also, a few of our features have been postponed until the next issue. For example Paul Bingham was to have the second installment of his CLASSY FRONT END series published in this issue. But I gave Paul some time off for a very good reason–he had a new addition to his family. A new son, Spencer Christian Bingham, was born on April 21st. Congratulations to a proud Dad and Mom. We’ll see Paul back again next issue.

In closing, I might add that if there is something special you would like to see printed in an upcoming issue (perhaps an article or program for your computer in an area of special interest), just drop me a short note, and I’ll see what I can do. Until then, “Happy Computing” and “don’t give up on the chip!”

Sincerely,
Tim Woods
Managing Editor
Time Designs Magazine Co.