text87 plus4 version 2

See all articles from Sinc-Link v10 n4
Author(s): Hugh H. Howie
Publication: Sinc-Link
Pub Details: Sinc-Link v10 n4 (Volume 10, Issue 4)
Date: July/August 1992
Pages: 17-18

I guess I was probably one of the first to get plus4 which is the updated version of text87, which is a vast improvement on Quill.

Plus4 (version 1) as it originally arrived crashed with great frequency especially with the last line erased. There were other problems also, but that was the principal one. This caused me to lose a lot of work which I had spent a lot of time putting together. I was most annoyed and got a letter off to Software in short order with my complaints.

Now at this point I would like to make something quite clear, when I review a program or hardware, I will write of my experiences, I will not hide or gloss over any fault I find with the item under review. I feel that if I find a fault I should mention it, then others will know what to expect should they purchase that item. I will not at any time make glowing comments just to please the purveyor or producer of that item. Having made that point, let’s get on with the meat of plus4.

After my letter to Software a reply was not long in coming, with VERSION 2. This is the version which should have been sent out in the first instance. Not only the crash problem was solved, but also a lot of other little ones which made Ver 2 much slicker to work with. Some of the menu commands had been altered slightly, and also some additions had been made for better control.

According to the short note which came with version 2 the problem which caused the crashing “……also affected the integrity of the text formatting data stored in _T91 documents” What this means is that any documents produced with version 1, are not able to be loaded into version 2 other than as an ASCII file; any documents so made lose all layout setup etc as provided in the original document.

Version 1 came with a good manual. It states that the manual is “a learning aid for the use of text 87………and is not meant to be a specification for the use of text87.” Version 2, as I received it, did not have an up-dated manual, just a one page note that a few changes had been made. I understand that Ver 2 as now issued comes with the Ver 1 manual, plus two extra pages. I have not seen the extra pages as yet, but would like to.

One thing missing from the manual is an Index, I made up my own index from reading the manual and from the use of all the menus in the program, so that I can refer to this index and see where what is going to lead me.

Another item missing from many manuals are samples. Plus 4 has three, a “Sample Mail_merge”, “Sample Document”, and a “Sample Manual” All very useful and informative.

Version 2 is touted as not requiring the aid of a manual as there is plenty on-screen help available, and that the menus are sufficient. I find that the manual is of inestimable value, even altho’ it is for version 1. There are many instances where you must refer to the manual to get any action; for example, try setting the “layout” of a document with headers and footers (now known as “text Sections”) without using the manual! It is a complicated although very efficient operation but the on-screen help is not of much value in this particular instance. OH! yes, the on-screen manual can be printed out for better study, but it is still not as complete as the original version 1 manual. And the slip of paper which comes with version 2 is not as complete as it might be.

No doubt the later purchasers will be given an up-dated manual. I intend writing to see if one is available.

Selection of type and fount to use is very much simplified. There are lots of Founts supplied, and lots of Printer Drivers to select from. There is no reason you will not find a Driver and a Fount to suit your taste.

When Loading a file, (and also when saving a file) when you are asked for the name of the file, by pressing one of the Arrow keys, a display of the files on the default data disk is displayed. Selection from this list is by use of the Arrrow keys, and then the file is loaded automatically.

Many of us know the frustration of having a stack of three or four disks and only being able to save to #1 or #2. Version 1 was one of those, but ver 2 will save to whatever you wish almost, e.g. RAM8_. DEV, NET, WIN etc.

Speed of scrolling up or down is really fast. It is possible to scroll one line at a time, or by paragraph or by page. Search or Search/Replace is equally fast and efficient. Found before finger leaves key.

There is an excellent Spelling Checker available with two English dictionaries. Also a French , a German

The ‘Qtyp_dictionary’ is easy to use, but there is also a ‘bigger’_dictionary which should just about satisfy the needs of the most fastidious and demanding writer. Unfortunately this ‘bigger’ dictionary takes up a horrendous amount of memory, and is intended only for those with the Gold Card or Mega ST’s. However, the regular dictionary is adequate. Replacement or amendment of any given word is at the users discretion or automatically on demand. Sorry, it will not correct typing errors on its own! Should your document contain words which are not in the dictionary then it is a simple operation to incorporate them in the regular dictionary, or even to make up a “specialised” dictionary of your own.

Any spelling checker is only good to a degree. Should you use the word “their” instead of “there”, or “wine” instead of “whine”, or if you type i instead of I, no spelling checker is going to get you out of that one! Still, it can assist in pointing to real bloopers. Yes, it can be handy, but I still prefer to rely on my own knowledge such as it is.

When you wish to Print the document, you are given an option to preView it just as it will go to the printer. This is an excellent feature as you can see on screen exactly how it will appear on paper. One serious flaw I came across is that I cannot find a way to print a couple of lines, it has to be the complete page. With the original text87 you could print three or four lines if so desired.

It is possible to have more than one document in memory at the same time, and to switch from one to the other, and also to have a portion of each document on-screen at the same time. You can have parts of three or four documents on display! Alright it can be a bit messy on occasion, but it is still very handy if you wish to work one document and have the other there for reference.

text87 in its original form took a lot of work to learn how to make the most of it. The transition to plus 4 is not too hard to accomplish. I would imagine that plus 4 is probably much easier to learn from scratch than text87.

The manual takes 56 pages to tell you how to do what, so how am I supposed to do the same thing in a couple pages? There is only one way to evaluate this program, and that is to try it for yourself. I am sure you will not be disappointed

Plus 4 is an excellent word processor and I would not like to be without it. This is what the serious writer requires. I can ask for nothing more than what we have here, sure I have a couple of beefs about it, but those are not really serious beefs, and with more acquaintance with the program, those should be eliminated.

I am sure glad I spent the money getting plus4, I have spent some time mentioning version 1 and version 2, that is only to show you that Ver 2 is all that it should be. I would not be without plus 4. I am not an expert on word processors, but this sure hits the spot with me. I can hardly ask for more. Plus 4 is first class. The way we all like to go. Expensive-Yes. Extensive-Undoubtedly. If you like to write ——– get plus 4.

Available from EMSOFT, PO Box 8763, Boston. MA 02114

(052792)