RS232 Interface

See all articles from Sinc-Link v7 n2
Author(s): Rene Bruneau
Publication: Sinc-Link
Pub Details: Sinc-Link v7 n2 (Volume 7, Issue 2)
Date: March/April 1989
Pages: 17

What is an RS232 interface?

What is the difference between serial and parallel ports

What is a Centronics port?

What does Asynchronous mean?

Questions, questions, questions. I often wonder how many people listen to our discussions and are completly lost by the slang (computerese) that we use. If they do ask questions how often are the answers clear? To answer the questions above it is necessary to give a bit of background information.

RS232 is a specification that was developed in 1969 by the Electronic Industries Association. It is a standard that establishes how computers (data terminal equipment -DTE- ) can communicate with modems and serial printers (data communications equipment -DCE- ). Over the years many modifications and manufacturers preferances have made the standard confusing but the basis remains the same.

The RS232 Interface actually consists of two items;

1. The Asynchronous Communications Adapter (the circuitry)

2. The Serial Port (the connector where you plug the cable into.)

A character (8 bits) is transmitted to the adaptor by the computer all at the same time (parallel data transfer) and are captured by the adaptor. These 8 bits are then transmitted one at a time by the async adaptor. The parallel data has been converted to a serial stream of bits. The process can take any amount of time and is not governed by a clock rate hense the word asynchronous.

At the receiving end, another async adapter reconstructs the character by reversing the process. Serial data is converted back to parallel data. Serial data can be transmitted over long distances without deteriation of the data.

A Parallel port simply presents all 8 bits at its output and these are picked up by the receiving device at its parallel port. The data present is affected by attenuation over long distances and therefore is not suitable for communication over long distances. By the way, one of the first companies to provide parallel interfacing to the consumer was called Centronic and they set the standard that is still being recognized today.