TASMAN Interface (courtesy of Mike Shaw)
1) Load Tasman Interface software. Answer questions for your brand of printer. Then press (B) to go to BASIC.
2) Enter the following:
DELETE 10,8000
10 CLEAR 54015
20 LOAD "" CODE
30 POKE 54205,204
40 POKE 54206,252
50 STOP
3) Run this new program, loading the MC to MTERM I in line 20. Next type:
DELETE 1,50
10 LOAD "" CODE
20 LOAD "" CODE
30 RANDOMIZE USR 54016
40 SAVE "M/I" LINE 10
50 SAVE "modem" CODE 54016,8000
60 SAVE "int" CODE 64716,652
70 STOP
4) Insert a new cassette into your recorder and enter:
GOTO 40
Your will have to press ENTER three times during the saving process.
5) Your customized MTERM I is now complete to use with the Tasman Printer Interface. Load in the same manner as normal.
AERCO Interface (courtesy of Andy Gippetti)
1) Enter the following program:
10 CLEAR 54015
20 LOAD "" CODE
30 POKE 54205,116
40 POKE 54206,252
50 LOAD ""
2) Save this program on a blank cassette. Stop the cassette after saving and DO NOT rewind.
3) NEW the computer, and load the MC part of MTERM I with:
LOAD "" CODE
4) Insert your new tape and save the MC with:
SAVE "aterm" CODE 54016,8000
Again, stop the tape and remove without rewinding.
5) NEW the computer again, and load the customized AERCO print driver software. EXIT TO BASIC and do the following:
DELETE 1,9981
9993 POKE 64263,0
9994 POKE 64264,0
9995 POKE 64265,0
9996 RAND USR 64628
9998 RAND USR 54016
6) Insert your new tape again and type GOTO 1. You will need to press ENTER twice during the saving.
7) Once this is done, your customized MTERM I is complete. To use, simply LOAD in the normal manner.
TSH