Though what Chairman Don has to say in his column about manuals has a great deal of validity, I just love it when he gives me a chance to editorialize and make us all think a little. So put on your thick hide, Don, because here it comes!
Al Feng says “A manual can’t make you read it”. Don seems to be one of those people who reads a manual but doesn’t absorb/comprehend it. On page 9 of the LKDOS manual Larry Kenny states: “If you plan on distributing some software that is on LKDOS disks, using disks formatted as single sided will be compatible on more systems than double sided disks. (48 TPI is most common.)” And for this reason on page 10 of the same manual Larry states: “All software on disk from LarKen Electronics will be supplied on single sided 40 track disks unless requested otherwise.”
Don KNOWS I use only single sided double density (SSDD) disk drives and that to read any other format I must borrow a drive from a friend somewhere and go thru the hassle of converting the disks to SSDD format. Anyone with DSDD drives can easily send out SSDD disks! Yet Don, a LogiCall owner, keeps sending me DSDD formatted disks that DO NOT have LogiCall on them!
In paragraph 6 of his column he states a problem he had trying to BOOT a disk in drive one. Page 3 of the LogiCall manual says: “Press ‘N’ <ENTER> to activate AUTOSTART ….” Don, LogiCall on the LarKen system is not optional! It should be on all LarKen disks! The LogiCall way to boot an AUTOSTART in drive #1 is to hold the ENTER key down on system boot-up and then hit ‘1’ and then ‘N’ and ENTER. Just hit ? or H at the “DRIVE?’ or ‘Program? ‘ prompt to see why!
Don tries to remember what he hears on the phone instead of taking notes, we are all guilty of it from time to time. This is why I found it impossible to upload a program to him over the phone, (Paragraph 1). He couldn’t handle his side of the data transfer although there were just a few instructions I gave him to follow.
Some manuals are too verbose and poorly organized, what Don really needs along with his manual is a quickie card.
In Don’s defense, on the software side, we programmers often write programs with no help files and when the program leaves a blank screen for a long period of time, we forget that maybe putting a flashing “WORKING” on the screen to give the user a feeling of security! Just because we write programs doesn’t mean we can write manuals, so thanks for the input, Don. I will be sending you a new LogiCall manual to try.
Now in the last issue of ZXir QLive Alive!, we started a MODEM series and I wish to keep it going. This time I wish to take the BYTE-BACK modem because there are still some to be had for the TS2068. I don’t feel this is the only modem and software you should have but you should have one for your collection. Read the article.
Bob Swoger, Editor
TIMEX/Sinclair NorthAmerican
User Groups